KPS PNEUMATIC OIL LEVEL SWITCH

OPERATING PRINCIPLE:

Oil level switches are designed as a safety device for the stationary engine or compressor. The oil level switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level switch housing. The engine or compressor constantly consumes the oil from the crankcase. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm.

MODEL AVAILABLE:

KPS -  Pneumatic Oil Level Switch (No Oil Level Controller Function)

APPLICATIONS:

• Remote or offshore locations with no electric power
• Stationary engines and compressors
• Mechanical lubricators
• Pumps

FEATURES:

• Protects against lubrication failure
• Switch mechanism fully removable without draining oil
• Easy view convex sight window
• Fire Safe Valves available
• Switch test button standard
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level switches for synthetic oil applications now available

SPECIFICATIONS

STANDARD MATERIALS OF CONSTRUCTION:
Housing - Aluminum
Air Valve - Stainless Steel
Float Material - Closed Cell Polyurethane
Sight Window - Transparent Nylon (UV Stabilized)

PROCESS CONNECTIONS:
Air Inlet Connection - 1/4" FNPT
Oil Outlet Connections - (3) 3/4" FNPT

PNEUMATIC SWITCH DATA:
Switch Trip Point - 3/4" Drop
Maximum Air Valve Inlet Pressure - 100psi
Maximum Temperature - 180ºF / 82ºC

SPECIAL FEATURE:
Switch Test Button (Standard)

MOUNTING ADAPTER OPTIONS:
-1 = Clark MA & CFA
-2 = Clark HMB & TMB 
-3 = Clark RA, HRA, HBA, HCA, HLA & TLA
-4 = Ingersol-Rand SVG & KVS
-5 = Ingersol-Rand KVG
-6 = Cooper-Bessemer GMW
-7 = Cooper-Bessemer GMV
-8 = Cooper-Bessemer GMX
-9 = Universal Mounting
-9MS = KLCE type housing with four 3/8"-16UNC integral mounting studs for use with -9 universal mounting adapter or any mounting configuration which incorporates the stud pattern 
(Note: This option does not include the universal mounting adapter)
-10 = Slotted Adapter for Universal Mounting
-11 = Mechanical Lubricator Mounting 
-12 = Post Mount for 1/2" Pipe
-14 = Cooper Superior Compressor (Formerly White)
-15 = Ingersoll-Rand XVG & PVG
-16 = Cooper-Bessemer BMV & 275 (Available with varied oil level)
-17 = Waukesha VHP Engines F2895, F3251, F5108, L5790 and L7042 
(Replaces Inspection Door with Single Bolt Mounting Arrangement)
-18 = Waukesha VHP Engines F2895, F3251, F5108, L5790 and L7042 
(Same as -17 except with integral KENCO 1618 Low Flow Meter)
-19 = Ingersoll-Rand Rotary
-21 = Cooper-Bessemer 2400 SERIES 6
-24 = Ariel JGE (2/4 Throw), JGH (2/4 Throw), JGK (2/4 Throw) and JGT (2/4 Throw) Compressors
-25 = Ariel JGU (2/4/6 Throw), JGZ (2/4/6 Throw), KBB (4/6 Throw) and KBV (4/6 Throw) Compressors
-27 = Waukesha VHP Engines F2895, F3251, F5108, L5790 and L7042 
(Replaces Inspection Door with Two Bolt Mounting Arrangement)
-37 = Waukesha P9390 Engine 
(Replaces Inspection Door)
-38 = Waukesha P9390 Engine 
(Same as -37 except with integral KENCO 1618 Low Flow Meter)
-39 = Waukesha P9390 Engine 
(Same as -37 except with integral KENCO 14308 Low Flow Meter)
-40 = Waukesha VHP Engines F2895, F3251, F5108, L5790 and L7042
(Same as -17 except with integral KENCO 1618 Low Flow Meter)
-48A = Ariel JGB (4/6 Throw), JGC (2 Throw), JGD (2 Throw) and JGV (4/6 Throw) Compressors
-48B = Ariel JGC (4/6 Throw) and JGD (4/6 Throw) Compressors with Standard Shaft Rotation and Single Chain Drive / Ariel JGC (6 Throw)and JGD (6 Throw) Compressors with Reverse Shaft Rotation and Dual Chain Drive
-48C = Ariel JGC (4/6 Throw) and JGD (4/6 Throw) Compressors with Reverse Shaft Rotation and Single Chain Drive / Ariel JGC (6 Throw) and JGD (6 Throw) Compressors with Standard Shaft Rotation and Dual Chain Drive
-991 = Dresser Rand HOS (4/6 Throw) Compressors
-C33/34 = Caterpillar C3300/3400 Engines

ADDITIONAL OPTIONS:
Fire Safe Valve Option -
-FS = Fire Safe Valves
Seal Option - 
-V = Fluorocarbon Seals
Hose Kit Option -
-K = Hose Kit consisting of 6' of 3/4" I.D. Hose, (2) 1/2" NPT Hose Barbs, (2) 3/4" NPT Hose Barbs and (4) Hose Clamps
Synthetic Oil Option - 
Contact KENCO with Type and Specific Gravity of synthetic oil being used in the application